Layer view in results due to composite property

General Questions
1

Hi,

I’ve managed to set up a calculation with a composite property. As part of the analysis of the results, I would like to be able to visualize the stresses, displacements, … per layer. Even if I set the Element Output to 2D, the result is always the 3D view (as shown in the image below). I’m actually looking to have the layers in a 2D mesh so as not to have the 3D view overlap.

Thanks for your help

image
image1920×969 176 KB

Best regards

2

it’s default output 3d for shell element with composite options in CalculiX, but each layer can be hide or shown in post-processor of PrePoMax.

3

Hi

Ok, thank you very much for your answer

Best regards