2D Tube bending

[Matej]

@FEAnalyst

The minimum time increment is a value below which the solver cannot go when decreasing the increment size. Sometimes quite low increments are needed and you can set it to e.g. 1E-5 (default) or even lower (1E-6 or 1E-7).

Is this possible in CalculiX? I still have no answer to this question:

Can we set min time increment less than 1e-5

can we set min time increment less than 1e-5? when i set it ,it seems that it does not take efffect. [min time increment] [state]