# When meshing solids, the "Quad-dominated" option does not work for me

**URL:** <https://prepomax.discourse.group/t/when-meshing-solids-the-quad-dominated-option-does-not-work-for-me/2450>\
**Category:** General Questions\
**Created:** [February 9, 2025, 10:46am UTC](https://prepomax.discourse.group/t/when-meshing-solids-the-quad-dominated-option-does-not-work-for-me/2450 "2025-02-09T10:46:12Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [February 10, 2025, 9:00am UTC](https://prepomax.discourse.group/t/when-meshing-solids-the-quad-dominated-option-does-not-work-for-me/2450/7 "2025-02-10T09:00:35Z")

</div>

> [@synt](#):
>
> i checked again in menus to generate hex-dominant mesh, it seems some option is missing in `Mesh.Recombine3DAll` to be activated (yes/1) instead of default (no/0).

You are right. This option could be added, since the resulting meshes look nice.

---

_[View the full topic](https://prepomax.discourse.group/t/when-meshing-solids-the-quad-dominated-option-does-not-work-for-me/2450)._