# \*WARNING in gentiedmpc: no tied MP

**URL:** <https://prepomax.discourse.group/t/warning-in-gentiedmpc-no-tied-mp/1519>\
**Category:** General Questions\
**Created:** [February 16, 2024, 1:59pm UTC](https://prepomax.discourse.group/t/warning-in-gentiedmpc-no-tied-mp/1519 "2024-02-16T13:59:23Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\
**Post date:** [February 16, 2024, 2:37pm UTC](https://prepomax.discourse.group/t/warning-in-gentiedmpc-no-tied-mp/1519/6 "2024-02-16T14:37:51Z")

</div>

The tolerance setting should correspond to the largest orthogonal distance between the slave node and opposing master face that should still be connected plus some small distance as a reserve. Don’t forget about the adjustment.

---

_[View the full topic](https://prepomax.discourse.group/t/warning-in-gentiedmpc-no-tied-mp/1519)._