# Stacked flow plates - model simplification

**URL:** <https://prepomax.discourse.group/t/stacked-flow-plates-model-simplification/1959>\
**Category:** General Questions\
**Created:** [August 19, 2024, 8:36am UTC](https://prepomax.discourse.group/t/stacked-flow-plates-model-simplification/1959 "2024-08-19T08:36:00Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![DavidJ](https://avatars.discourse-cdn.com/v4/letter/d/d2c977/32.png) [@DavidJ](https://prepomax.discourse.group/u/DavidJ)\
**Post date:** [August 19, 2024, 9:39am UTC](https://prepomax.discourse.group/t/stacked-flow-plates-model-simplification/1959/5 "2024-08-19T09:39:02Z")

</div>

Here is a screenshot of the top 2 plates. I’ve made them semi-transparent to give an idea of the flow channels. In the full model there an extra 2 plates below these, which are mirror images (across the bottom face of the lower plate shown).

 ![Clipboard01](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/8/8411df0b73e275896f88cdf75932da45500bf827.jpeg)

The stud/nut fasteners have been cut though at the symmetry plane / contact face.

---

_[View the full topic](https://prepomax.discourse.group/t/stacked-flow-plates-model-simplification/1959)._