# No result file, and no open

**URL:** <https://prepomax.discourse.group/t/no-result-file-and-no-open/3696>\
**Category:** General Questions\
**Created:** [September 24, 2026, 5:23am UTC](https://prepomax.discourse.group/t/no-result-file-and-no-open/3696 "2026-09-24T05:23:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maxing](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@Maxing](https://prepomax.discourse.group/u/Maxing)\
**Post date:** [September 24, 2026, 5:23am UTC](https://prepomax.discourse.group/t/no-result-file-and-no-open/3696/1 "2026-09-24T05:23:16Z")

</div>

The calculation finished normally, but the result wasn’t saved.

 ![6](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/0/0d527c6d47e11a6a3d2da068520e580a5efd809f.png)

---

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [September 24, 2026, 6:36am UTC](https://prepomax.discourse.group/t/no-result-file-and-no-open/3696/2 "2026-09-24T06:36:51Z")

</div>

Check in the working folder /Temp if there is .frd file. Do you have default field outputs set?

---

<div class="post-metadata">

**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\
**Post date:** [September 24, 2026, 6:54am UTC](https://prepomax.discourse.group/t/no-result-file-and-no-open/3696/3 "2026-09-24T06:54:05Z")

</div>

You can always try submitting the analysis externally: [Using standalone CalculiX](https://prepomax.discourse.group/t/using-standalone-calculix/846)

But most importantly, check if the .frd file can be imported to PrePoMax or opened using GraphiX (described in the thread linked above).