# Load Case Creation

**URL:** <https://prepomax.discourse.group/t/load-case-creation/133>\
**Category:** General Questions\
**Created:** [March 31, 2022, 7:27pm UTC](https://prepomax.discourse.group/t/load-case-creation/133 "2022-03-31T19:27:49Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\
**Post date:** [April 4, 2022, 9:23am UTC](https://prepomax.discourse.group/t/load-case-creation/133/17 "2022-04-04T09:23:25Z")

</div>

Right, I created a similar model in Abaqus (rectangular shell subjected to bending but due to gravity to avoid issues with differences in surface/load definitions in Abaqus and CalculiX). I defined two identical steps with op=new (Abaqus uses op=mod by default) and the results were the same for both steps. Then I solved the same input file with CalculiX and there was a difference in results, similar to what we saw here.

I can report this problem on the CalculiX forum.

> [@Matej](#):
>
> I could not find the limitation of the FIXED parameter for the translational DOFs only.

I get this error when Fixed is defined for rotations:

> \*ERROR in bounadd: parameter FIXED cannot  
> be used for rotations

---

_[View the full topic](https://prepomax.discourse.group/t/load-case-creation/133)._
