# Hide result part

**URL:** <https://prepomax.discourse.group/t/hide-result-part/3132>\
**Category:** Bug Reports\
**Created:** [December 10, 2025, 8:27am UTC](https://prepomax.discourse.group/t/hide-result-part/3132 "2025-12-10T08:27:04Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Guslan](https://avatars.discourse-cdn.com/v4/letter/g/958977/32.png) [@Guslan](https://prepomax.discourse.group/u/Guslan)\
**Post date:** [December 10, 2025, 8:27am UTC](https://prepomax.discourse.group/t/hide-result-part/3132/1 "2025-12-10T08:27:04Z")

</div>

Good Day,

I’ve tried to make deck strength analysis for a barge where Container loaded trailer is moving on top of deck. For the sake of simplicity, i only analyse 1 tire which has maximum force.

after running the analysis i notice there’s a message as shown below

**\*\*\*\* Exceptions \*\*\*\*  
12/10/25 15:13:58 Hide result parts: The given key ‘Solid\_part-11’ was not present in the dictionary**

What could be the cause of this problem here ? i’ve concern that the result shown may be not accurate enough because a part is hide by the system. Please advice

 ![image](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/2/28852aee82010b7c1839a9980064378965f88d82.jpeg)

---

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [December 10, 2025, 9:04am UTC](https://prepomax.discourse.group/t/hide-result-part/3132/2 "2025-12-10T09:04:03Z")

</div>

The information only states that some part is not found. Did you apply the Run postprocessing commands in the pop-up window after opening the results? That might be a problem.

---

<div class="post-metadata">

**Author:** ![Guslan](https://avatars.discourse-cdn.com/v4/letter/g/958977/32.png) [@Guslan](https://prepomax.discourse.group/u/Guslan)\
**Post date:** [December 11, 2025, 4:13am UTC](https://prepomax.discourse.group/t/hide-result-part/3132/3 "2025-12-11T04:13:23Z")

</div>

No, but when i tried to run the analysis using new version (Prepomax 2.4.2) & there’s no “Hide Result” message. May be it’s a bug in the system

 ![image](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/5/5220439091b007df383a2e06722b27fd1720da3d.png)

---

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [December 16, 2025, 4:39pm UTC](https://prepomax.discourse.group/t/hide-result-part/3132/4 "2025-12-16T16:39:17Z")

</div>

So, can I close this topic?

---

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [January 18, 2026, 4:47pm UTC](https://prepomax.discourse.group/t/hide-result-part/3132/5 "2026-01-18T16:47:39Z")

</div>