# Geometric Nonlinear Analysis of Shells

**URL:** <https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611>\
**Category:** General Questions\
**Created:** [March 18, 2024, 1:06pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611 "2024-03-18T13:06:13Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![ANYS](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/anys/32/7737_2.png) [@ANYS](https://prepomax.discourse.group/u/ANYS)\
**Post date:** [March 18, 2024, 1:06pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/1 "2024-03-18T13:06:13Z")

</div>

Hi,

Is there any possible ccx set up to bend a strip as it’s shown on the picture?

Cantilever subjected to end bending moment

 ![imagen](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/d/d1919fbeb1003f6f15fb0e0c3fb2ef3a2aec0702.png)

Ccx seems unable to go beyond 90º.

Picture is taken from :  
Popular Benchmark Problems for Geometric Nonlinear Analysis of Shells.  
K.Y.Sze1\*, X.H.Liu1#, S.H.Lo2  
Departments of Mechanical1 and Civil Engineering2  
The University of Hong Kong, Pokfulam Road, Hong Kong SAR, P.R.CHINA.

Regards

---

<div class="post-metadata">

**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\
**Post date:** [March 18, 2024, 1:07pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/2 "2024-03-18T13:07:41Z")

</div>

Have you seen this example by M. Kraska ? [CalculiX-Examples/Streifen at master · calculix/CalculiX-Examples · GitHub](https://github.com/calculix/CalculiX-Examples/tree/master/Streifen)

---

<div class="post-metadata">

**Author:** ![ANYS](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/anys/32/7737_2.png) [@ANYS](https://prepomax.discourse.group/u/ANYS)\
**Post date:** [March 18, 2024, 1:38pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/3 "2024-03-18T13:38:35Z")

</div>

Mr. Kraska also struggled close to 90º and he tries solving with mean rotation MPC’s, Rigid Body and kinematic coupling.

One end is rotated, and the incremental time becomes too small, and the solution is stopped at different percentages.

I have completed the rotation but it’s not a standard nor elegant way at all.  
Appling a Moment as it is solved in the paper seems like 90º is a limit condition¿?.

It is part of a series of nice and challenging benchmarks, and I’m stuck with this one.

---

<div class="post-metadata">

**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\
**Post date:** [March 18, 2024, 2:16pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/4 "2024-03-18T14:16:15Z")

</div>

This is also interesting: [Large rotation shell benchmark test - #2 by vicmw - CalculiX (official versions are on www.calculix.de, the official GitHub repository is at https://github.com/Dhondtguido/CalculiX).](https://calculix.discourse.group/t/large-rotation-shell-benchmark-test/401/2)

---

<div class="post-metadata">

**Author:** ![ANYS](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/anys/32/7737_2.png) [@ANYS](https://prepomax.discourse.group/u/ANYS)\
**Post date:** [March 18, 2024, 2:34pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/5 "2024-03-18T14:34:13Z")

</div>

That seems to be the same benchmark and was my first motivation. I saw a picture in Victor’s manual that was promissing but…didn’t completely work.

 ![imagen](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/8/84649dda7eba95c61b8bf5fb711d1a0272071159.png)

There is also a file posted in his forum and I tried to push up to the full rotation without exit.

Sems like the moment is converted into a force which is not a follower so initial forces pointing in the vertical direction doesn’t allow the strip to keep rotating.

I guess if someone managed to get it here. 🤔

---

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [March 18, 2024, 3:01pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/6 "2024-03-18T15:01:25Z")

</div>

I think that Victor suggested Dload. Is Dload a follower force?

---

<div class="post-metadata">

**Author:** ![ANYS](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/anys/32/7737_2.png) [@ANYS](https://prepomax.discourse.group/u/ANYS)\
**Post date:** [March 18, 2024, 3:24pm UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/7 "2024-03-18T15:24:49Z")

</div>

But Dload is perpendicular to the surface. I can’t apply it to the lip.

---

<div class="post-metadata">

**Author:** ![synt](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/synt/32/4658_2.png) [@synt](https://prepomax.discourse.group/u/synt)\
**Post date:** [March 20, 2024, 6:17am UTC](https://prepomax.discourse.group/t/geometric-nonlinear-analysis-of-shells/1611/8 "2024-03-20T06:17:28Z")

</div>

below, model of solid element with four layer trough thickness of linear hexahedral (reduced) and maximum 2.5mm mesh size.

 ![2024-03-20 13_14_24-](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/4/4d4ec4494e435a55f3a216f93030d574a434b137.png)

 ![2024-03-20 13_13_44-](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/6/61916b6e2cdc606a1314a22bbe891263fdb123bc.png)

 ![2024-03-20 13_14_01-](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/7/751b6076d2d1748df18b68b39cbe62a8b3c3da80.png)

p.s deflected shape is true scale

add higher rotation, it seems convergence is related to mesh.

 ![2024-03-20 13_30_04-](https://global.discourse-cdn.com/free1/uploads/prepomax/original/2X/4/4a78c158076462e59ef3ccd8c9efe7e3ca856afe.png)
