# Failed to create mesh

**URL:** <https://prepomax.discourse.group/t/failed-to-create-mesh/158>\
**Category:** General Questions\
**Created:** [April 18, 2022, 9:34am UTC](https://prepomax.discourse.group/t/failed-to-create-mesh/158 "2022-04-18T09:34:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TOMIN](https://avatars.discourse-cdn.com/v4/letter/t/a6a055/32.png) [@TOMIN](https://prepomax.discourse.group/u/TOMIN)\
**Post date:** [April 18, 2022, 9:34am UTC](https://prepomax.discourse.group/t/failed-to-create-mesh/158/1 "2022-04-18T09:34:13Z")

</div>

I have attached the model which I used for meshing. The meshing was failed.  
[compound.pmx](https://prepomax.discourse.group/uploads/short-url/jhksgXEMzRzFgwqYhVv9UC5M9Ss.pmx) (124.4 KB)

---

<div class="post-metadata">

**Author:** ![Matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Matej](https://prepomax.discourse.group/u/Matej)\
**Post date:** [April 19, 2022, 7:12pm UTC](https://prepomax.discourse.group/t/failed-to-create-mesh/158/2 "2022-04-19T19:12:06Z")

</div>

The problem are probably very small edges that appear in the geometry. You can find them using Geometry-\>Analyze. The inaccuracy already exists in the geometry before you made a compound.