# Error creating an Axisymmetric model **URL:** \ **Category:** General Questions\ **Created:** [November 14, 2023, 6:28pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249 "2023-11-14T18:28:57Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Michele](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@Michele](https://prepomax.discourse.group/u/Michele)\ **Post date:** [November 14, 2023, 6:28pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/1 "2023-11-14T18:28:57Z")
Dear All, I’m a Prepomax new user, so my question should be very simple. I’ve created a model with 2 plane surface bodies and meshed with CAX6 elements in Prepomax. I’ve created contact, loads and BCs, but the Analysis branch presents a red X and doesn’t run. I attached the example: can you explain me where is the errror? > **[Pippo.pmx](https://drive.google.com/file/d/1Anahun54FX4TDJqaEIpwbssLUgHvnyAx/view?usp=sharing)** > > Google Drive file. Thanks Michele ---
**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\ **Post date:** [November 14, 2023, 6:30pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/2 "2023-11-14T18:30:19Z")
Red X only means that the analysis is not solved yet. It will work if you right-click on it and select Run. ---
**Author:** ![Michele](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@Michele](https://prepomax.discourse.group/u/Michele)\ **Post date:** [November 30, 2023, 2:50pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/3 "2023-11-30T14:50:52Z")
Hi FEAnalyst, I push run but the simulation failed. I’ve used the Check model button, but the system returns the error: \*WARNING: no analysis option was chosen What does It means? What I’m wrong? Thanks Michele ---
**Author:** ![Michele](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@Michele](https://prepomax.discourse.group/u/Michele)\ **Post date:** [November 30, 2023, 2:52pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/4 "2023-11-30T14:52:29Z")
My file shared at the link below > **[Google Drive: Sign-in](https://accounts.google.com/v3/signin/identifier?continue=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F19kGyh2BZHQ7STSPvjCPYuq0ks8ymdMtR%2Fview%3Fusp%3Ddrive_link&followup=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F19kGyh2BZHQ7STSPvjCPYuq0ks8ymdMtR%2Fview%3Fusp%3Ddrive_link&ifkv=ASKXGp1dKhfGfAhuYINAMEWxufm1mPk2CQDs57kri4lxYUbOCBYe52i5hd5ICX2SiWW2G5R2l1RAqg&osid=1&passive=1209600&service=wise&flowName=GlifWebSignIn&flowEntry=ServiceLogin&dsh=S554628470%3A1701355943918664&theme=glif)** > > Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use). Michele ---
**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\ **Post date:** [November 30, 2023, 2:58pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/5 "2023-11-30T14:58:32Z")
> [@Michele](#): > > I push run but the simulation failed. I’ve used the Check model button, but the system returns the error: > > \*WARNING: no analysis option was chosen It’s not an error, it’s just a warning that the Check model option performs check run without calculating anything. You have to choose Run to actually submit the calculations. > [@Michele](#): > > My file shared at the link below You have to set access to “Anyone with the link” first. ---
**Author:** ![Michele](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@Michele](https://prepomax.discourse.group/u/Michele)\ **Post date:** [November 30, 2023, 4:41pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/6 "2023-11-30T16:41:58Z")
> **[Google Drive: Sign-in](https://accounts.google.com/v3/signin/identifier?continue=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F19kGyh2BZHQ7STSPvjCPYuq0ks8ymdMtR%2Fview%3Fusp%3Ddrive_link&followup=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F19kGyh2BZHQ7STSPvjCPYuq0ks8ymdMtR%2Fview%3Fusp%3Ddrive_link&ifkv=ASKXGp1dKhfGfAhuYINAMEWxufm1mPk2CQDs57kri4lxYUbOCBYe52i5hd5ICX2SiWW2G5R2l1RAqg&osid=1&passive=1209600&service=wise&flowName=GlifWebSignIn&flowEntry=ServiceLogin&dsh=S554628470%3A1701355943918664&theme=glif)** > > Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use). Now the access is to everyone. After launching the analysis I receive the message: “Job failed - no results exist.” Thanks a lot, Michele ---
**Author:** ![Michele](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@Michele](https://prepomax.discourse.group/u/Michele)\ **Post date:** [November 30, 2023, 5:18pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/7 "2023-11-30T17:18:07Z")
It seems that two lines are created in the input file but are not present in the tree: \*\* Name: Compression\_Only\_BC \*Boundary Internal\_All\_Compression\_Only\_Constraints\_NodeSet, 1, 1, 0 Internal\_All\_Compression\_Only\_Constraints\_NodeSet, 2, 2, 0 \*\* Unfortunatelly I cannot upload the image of the tree. 🧐 ---
**Author:** ![FEAnalyst](https://yyz2.discourse-cdn.com/free1/user_avatar/prepomax.discourse.group/feanalyst/32/688_2.png) [@FEAnalyst](https://prepomax.discourse.group/u/FEAnalyst)\ **Post date:** [November 30, 2023, 5:28pm UTC](https://prepomax.discourse.group/t/error-creating-an-axisymmetric-model/1249/8 "2023-11-30T17:28:33Z")
> [@Michele](#): > > Now the access is to everyone. It still doesn’t work, you may have to generate a new link (and paste it here) after you change the access settings. > [@Michele](#): > > It seems that two lines are created in the input file but are not present in the tree: It shouldn’t happen in the newest dev version (1.5.7), try using it.