# Cantilever beam with load at one end

**URL:** <https://prepomax.discourse.group/t/cantilever-beam-with-load-at-one-end/1241>\
**Category:** General Questions\
**Created:** [November 12, 2023, 4:46pm UTC](https://prepomax.discourse.group/t/cantilever-beam-with-load-at-one-end/1241 "2023-11-12T16:46:03Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![CrisBab](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@CrisBab](https://prepomax.discourse.group/u/CrisBab)\
**Post date:** [November 19, 2023, 4:06pm UTC](https://prepomax.discourse.group/t/cantilever-beam-with-load-at-one-end/1241/10 "2023-11-19T16:06:20Z")

</div>

Hi,

your solution works if the mesh is structured and the edges coincide with the position you need.  
For tetra mesh, I have to draw additional support lines and nodes, right?

Can you suggest any reference books that deal with basic/advanced structural problems to check with FEA?

Thanks

---

_[View the full topic](https://prepomax.discourse.group/t/cantilever-beam-with-load-at-one-end/1241)._